Membangun Jaringan Inter VLAN Router Menggunakan PacketTracer

Hai.. Kali ini saya akan berbagi tentang membangun jaringan inter-vlan menggunakan PacketTracer. inter vlan ini akan menghubungkan antar vlan mengguanakn Router. Ok, langsung saja tutorialnya.

1. Pertama, Kita buat Topologi seperti dibawah ini:

2. Kemudian konfigurasi Router dengan memasukkan perintah berikut:

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip addr 192.168.1.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int fa0/1

Router(config-if)#ip add 192.168.2.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

 3. Kemudian konfigurasi Switch seperti dibawah ini:

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan 10

Switch(config-vlan)#name SAKTI

Switch(config-vlan)#vlan 20

Switch(config-vlan)#name GEMOLONG

Switch(config-vlan)#int range fa0/1-2,fa0/5

Switch(config-if-range)#sw mode access

Switch(config-if-range)#sw access vlan 10

Switch(config-if-range)#exit

Switch(config)#int range fa0/3-4,fa0/6

Switch(config-if-range)#sw mode access

Switch(config-if-range)#sw access vlan 20

Switch(config-if-range)#exit

Switch(config)#

4. Kemudian Setting IP pada PC/Laptop sesuai dengan ketentuan diatas:
#Laptop0 dengan network 192.168.1.0

#Laptop1 dengan network 192.168.1.0

#Laptop2 dengan network 192.168.2.0

#Laptop3 dengan network 192.168.2.0

5. Kemudian Cek Maisng-masing Konfigurasi:
a. Router

Router#show ip interface br

Interface IP-Address OK? Method Status Protocol

FastEthernet0/0 192.168.1.1 YES manual up up

FastEthernet0/1 192.168.2.1 YES manual up up

Vlan1 unassigned YES unset administratively down down

Router#

b. Switch
 

Switch(config)#do show vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/7, Fa0/8, Fa0/9, Fa0/10

Fa0/11, Fa0/12, Fa0/13, Fa0/14

Fa0/15, Fa0/16, Fa0/17, Fa0/18

Fa0/19, Fa0/20, Fa0/21, Fa0/22

Fa0/23, Fa0/24

10 SAKTI active Fa0/1, Fa0/2, Fa0/5

20 GEMOLONG active Fa0/3, Fa0/4, Fa0/6

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

10 enet 100010 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 tr 101003 1500 - - - - - 0 0

--More--

c. PC/Laptop

 Nah.. Jika sudah seperti diatas, maka Membangun Jaringan Inter VLAN Router Menggunakan PacketTracer telah berhasil. Sekian dari Saya, Semoga bermanfaat.